nimbus® R
Lightning rod with remote test technology
In the standard nimbus® series, maintenance is performed using the LR-Tester product, which requires physical access to the lightning rod, at the height at which it is installed.
The nimbus® R range simplifies this process by incorporating remote verification technology. This way one can check its operation, with the help of a remote control called R-Tester, without physically accessing the lightning rod.
This feature, in addition to facilitating and speeding up the maintenance process, results in cost savings. This makes the nimbus® R lightning rod especially suitable for installations where circumstances require frequent maintenance at an optimal cost.
Features
Remote result on the remote control
R-Tester is universal. Any nimbus® R lightning rods can be tested from a single remote control serial number
Long range. The technology incorporated in R-tester and nimbus® R, allows testing,serial number by serial number from great distances
Check to validate the installation. Make sure the nimbus® R works correctly right after completing the initial installation
Reduced maintenance costs
Peace of mind. It allows periodic maintenance tests without the need to physically access the lightning rod
Remote testing
Remote test using the universal R-Tester control, with wide range of RF communication in open areas.
The R-Tester is especially indicated for installation professionals and external lightning protection maintenance professionals.
*R-tester is sold separately, it is not included.
Remote testing
Remote test using the universal R-Tester control, with wide range of RF communication in open areas.
The R-Tester is especially indicated for installation professionals and external lightning protection maintenance professionals.
*R-tester is sold separately, it is not included.
Off-the-grid
It requires no external power as it includes a PV module and a high capacity battery which allows the communication to be powered as well as to make exhaustive tests of the internal operating electronics of the lightning rod (emission and charge).
Led communication
When performing a test, a high intensity LED on the lightning rod provides visual verification that the communication between the lightning rod and the remote control is taking place correctly.
Verifiable quality
Peace of mind
At Cirprotec, as specialists in protection, we have more than 45,000 lightning rods installed. The nimbus® range offers a level of robustness well above the requirements set by the standard. Tests carried out in independent laboratories have demonstrated its ability to withstand discharges of up to 200kA.
Technical Specifications
- Temperature range: -10ºC … 80ºC
- Enclosure: IP67
- Material: stainless steel AISI 316 (air terminal) y ABS (PV box)
- Impulse discharge current (10/350 μs): 200 kA
- Min. cable section: 50mm²
- Flat tape width: 25-30 mm
- Flat tape thickness: 2-6 mm
- Power supply and communication: PV box + Li-ion battery 3,65V and radiofrequency communication
- High intensity red LED indicator on PV module
- NF C 17-102:2011
- UNE 21186:2011
- CE